Categories

Manufacturers

New products

Specials

No special products at this time.

Top sellers

LATEX PRODUCTS - Care Instructions & Repair Advice

RUBBER PRODUCTS - CARE INSTRUCTIONS & REPAIR ADVICE


With our small guide is designed to give you practical tips to help you maintain your latex products. Well Maintained latex clothing will remain when you want them.

Table of Contents
1. WASH & DRY
2. TIGHTEN & UNDRESSING
3. GLOSS intense & easy
4. STORAGE
5. REPAIRS
6. REP. - MADE HIMSELF
7. PRACTICAL TIPS
8. LATEX SELLING
9. LATEX PROCESSING
10. ALLERGY listen up!
11. SHARE YOUR EXPERIENCES


1. WASH & DRY

Please wash your latex clothing after each wearing. If necessary, add a little soap or dishwashing detergent and then rinse with clear lukewarm water cleaning agent again.
Hang the laundry loosely to dry. Water stains on the outside of the clothing you avoid by blotting with a dry towel. Please contact if necessary the garment several times. Particularly important are completely dry zippers. Their textile band is indeed sealed, but between the teeth can penetrate moisture. Extremely thin latex bonded together easily after washing. The double-sided dry garment you please powder from the inside lightly with talcum powder or wet the latex with a liquid cleaner. For this purpose, apply a small amount (pea size 3) of the polish on your latex product and massage this mass on your garment. No glue, no dust but you can so quick and easy to produce outstanding shine. If you use the products in shorter intervals is this a good alternative for storage with gloss factor. For longer storage periods, please see "shine".

SILICON OIL
Liquid silicone. Silicon oil is more than the name suggests, no-fat oil! Unlike fats and oils, which destroy the latex, you can handle with silicone oil your latex clothing.

SILICONE SPRAY
For intense shine is silicone sprays are best. Always follow the instructions of the manufacturer. There is a risk of slipping when used in confined spaces! The spray leaves on smooth floors a persistent slip film.

2. TIGHTEN & UNDRESSING

Caution! Long fingernails, jewelery or other sharp objects can damage the latex. Talcum powder or liquid donning facilitate donning, particularly narrow models.

TALC, TALCUM POWDER
Talcum powder is used as a dressing aid and facilitates donning a particularly narrow models. It makes the skin sliding without being greasy. For treatment after washing and drying, we also recommend the powdering. To do this, a little talc in the clothing, keep the openings eg the sleeve and to distribute the powder by shaking. A large shaker or a brush suitable well.

DONNING, LIQUID
Liquid dressing for easy donning, especially in tight latex clothing. To rub a few drops on the skin. So you slip through even the tightest sleeve.

CHLORIET
Latex garments can also be "chlorination". The surface is compacted so that no powder or lubricant may be needed later for more tightening. However, the smell and the feel of the material change by chlorinating something.

IMPORTANT NOTICE
Very sensitive to latex on the longer effects of grease. Body fat, Creams and lubricant grease base destroy the latex. The elasticity is lost, in the worst case, the material dissolves. Therefore, use only water-based lubes. Silicon oil is not greasy oil. You can safely latex clothing so polish.


3. GLOSS intense & easy

New latex clothing has a fine layer of talc for manufacturing reasons. This can be easily removed by polishing. The care agents most commonly used are latex polish. With this you get a matt finish. The application of a polish we recommend especially before storing your latex lingerie as these will not attract dust.

LATEX POLISH – Application
Spray with a pump spray bottle a little polish on the latex and distribute them with a soft sponge. After a short drying the garment is finished.

SILICONE SPRAY – Application
For intense shine sprays are best suited with silicone accessory. Always follow the instructions of the manufacturer. There is a risk of slipping when used in confined spaces! The spray leaves on smooth floors a persistent slip film.
Alternative: Use a pump spray bottle, here the spray is not as strong.


4. STORAGE

Keep the latex lingerie on in a dark, cool and dry place. Best on a wide temples. Wire clamps are also suitable as for masks. Please take care when choosing the bracket for compatibility with the latex product / metal clamps give Footprints in the material, with soft rubber beschichtetet strap can become discolored or deformed lead the latex dresses.

IMPORTANT NOTICE
Bright colors like white, yellow or transparent are sensitive to the contact with copper or its alloys, eg Brass. Keep belt buckles or jewelry made of these metals from your latex clothing away. The resulting stains can not be removed!


5. REPAIRS

We repair any model from our shop. Please often of such poor quality that a repair is not worth it. Not for you, if for example, dissolve the seams and completely not aware that we actually do not want to accept repairs and modifications of models from other manufacturers. (Unfortunately, some products for us as a revision of a bad product is far more expensive than its production. Please claim the purchased item from the respective manufacturer / distributor.

IMPORTANT NOTICE
Attention! If the garment is to be repaired, please do not include any kind of polish or gloss agents. These care products are at the same time release agents, which prevent the adhesion of adhesives. In this case: washing yes - no polishing.


6. REP. - MADE HIMSELF

If you want to perform minor repairs or modifications yourself, you will find the necessary ingredients and instructions in the following repair instructions.

Preparation of the product
The surfaces to be bonded must be clean, and above all free from silicone or abrasives. These care products are at the same time which also prevent separation means the liability of adhesives.

Glue and ingredients

RUBBER CLEANER
To be glued latex surfaces must be clean. To do this, use a lint-free cloth rag and our cleaners. Alcohol is also suitable, but takes longer to dry.

RUBBER ADHESIVE
The latex adhesive is a white latex milk, for thin and medium thickness up to 0.60 mm latex (rubber solution, suitable for strong latex above 0.60 mm). Latex glue on both sides of the surfaces to be bonded. Let this dry for now. Only when the adhesive layer appears completely transparent, the seams can be pressed together. Round objects to roll over are particularly good. The stability is already sufficient for first fittings. Completely cured, the splice is after 48 hours.


7. PRACTICAL TIPS

SMALL TEAR OR THREE ANGEL
Clean the adhesive surface around the crack around the inside and fix the outside with tape. Pay attention to exactly abutting edges of cracks. Now you can mask off the crack from the inside with something thinner latex.

PART OUT DISSOLVED ZIP
The textile backing band must be completely gummed before re-gluing. Soak the cloth tape to the zipper into a latex adhesive. This must be completely dry. The rubberized surface so can be processed as easily glue latex and again now.

REPLACEMENT OF A COMPLETE ZIP If an RV be useless, can this also exchange. Cut to the zipper close to the edge latex out (loosening the bonds can be between latex and fabric not). Gum the textile belt of the new zipper with a latex adhesive and allow it to dry completely.
So prepared zipper you can stick with all the latex surfaces.

RIPPED SOCKS, GLOVES & CONDOMS IN SUITS
These can be replaced. Please contact us with this problem.

DISSOLVED OUT PUSH BUTTONS, EYELET STUDDED or In general, the models are reinforced with rigid fabric ribbon or the like pushbuttons permanently fix.

DEFINITION TO RUBBER
Due to the effects of grease, the elasticity is lost, the latex dissolves.


8. RUBBER SELLING

Latex films are produced in different thicknesses between 0.10 mm and 2.00 mm. The strength of the material is assigned the use of the model. The most common materials are:
0.35 mm - Fine Latex for t-shirts, underwear and clothes.
0.60 mm - A medium strength. This is suitable for jeans and long jackets.
0.90 mm and thicker - Heavy latex. For these films motorcycle jackets and Bondageartikel be made.
Productions other than those stated by us strengths are of course possible.


9. RUBBER PROCESSING

In the manufacture of latex clothing various production methods are common:

DIVING here, a mold is repeatedly dipped into liquid latex and manufactured a garment. It is between anatomically dipped goods, ie products which are dipped in three dimensions and distinct shallow submerged items. Flat dipped goods is usually a little cheaper, since the formers do not have to be so complicated three-dimensional and made the plunge pools are usually smaller.
ADVANTAGE of this method is that the production is inexpensive and can be made even anatomically shaped parts.
DISADVANTAGE: openings and edges are not very strong and durable tear more easily, the surface often shines not so nice, the latex can be added more solvent, some people react allergic. (Since for each change a new diving form has to be built, no special sizes are possible).
The DIVE RUBBER COLORS usually differ slightly from the train latex paints.

GLUE (welding)
This processing corresponds to the material Latex most. Here, the latex is vulcanized and thus glued together. The garments are tailored correctly, it is possible to custom made. Cons: when `is well done: no, unless you're standing on seamless surfaces, because the better the fit, the more seams there are, of course. For technical reasons, there are at splices often narrow areas that came with the adhesive in conjunction and not as nice shine that can be polished away but with some love.

ADHESIVES AND SEWING
Especially thicker latex qualities are often sewn in addition. Excellent workmanship. The items of clothing usually do not stretch at the seams as solid ribbons are sewn, so the latex does not break at the needle puncture sites. It is therefore important to ensure that these items are ordered in the correct size. The particular variant of this is used in outerwear. Jackets, coats and pants have a distinctive seam-image. For tight latex lingerie, the stitching is less, because the seams are not very elastic, pull the yarn or the latex cut.


10. ALLERGY listen up!

Important note - ALLERGY

Rubber clothing, so clothing made of rubber is a natural product. Nevertheless, some people are allergic to natural latex, please contact malaise, shortness of breath or other allergic reactions to take off the clothing immediately and do an allergy test.


11. SHARE YOUR EXPERIENCES

In addition to these precautions, there are many more. Please send us your experiences. We are happy to add to our use and care instructions.